CAMERA, LENS, MEMORY CARD, TRIPOD
5 pieces-EOS 5D Mark II Body
1 piece-EOS 7D Body
7 pieces-EOS 600D Body
2 pieces-EOS 450 D Body
1 piece-EOS 400 D Body
1 piece-EOS 40 D Body
1 piece-EOS 10 D Body
2 pieces-EOS 5 D Body
2 pieces-Canon 50 mm f/1.4
3 pieces-Canon 17-40 mm f/4
1 piece-Canon 24-70 mm f/2.8
2 pieces-Canon 16-35 mm f/2.8
2 pieces-Canon 24-105 mm f/4
1 piece-Canon MP-E 65 mm f/2.8 Macro
1 piece-Canon 100 mm f/2.8 Macro
1 piece-Canon 15 mm f/2.8
1 piece-Canon 14 mm f/2.8
2 pieces-Canon 75-300 mm f/4-5.6
1 piece-Canon 70-300 mm IS
1 piece-Canon EF-S 10-22 mm f/3.5-4.5
1 set-Kenko Extension Tube (1-2-3)
1 piece-Canon XF100 Video Camera
1 piece-Cinematics (For Short Film Shooting)
4 pieces-Rode Microphone
Manfrotto Photography and Video Tripods (different heads) and its Lowepro Bags
Normal Zoom and fix lenses of Sigma
Several SanDisk Memory cards both SD and CF (mostly 16 GB)
Several NİKON Cameras and lenses (1 piece D300,2 pieces D90 ,inc.105 mm f/2.8 nanocrystal macro and 60 mm f/2.8 macro lenses)
The Metal and Wood Studios provide support for Visual Arts and Visual Communication Design students in the development of their studio practice. The facilities: 200 square meters located on the ground floor of the Faculty of Arts & Social Sciences building, serves as support for 3rd year, 4th year and graduate level students. A fulltime technical advisor and safety officer assisted by graduate teaching assistants, provide support for students and faculty Monday through Friday. Limited evening hours are available, supervised by a Teaching Assistant. Greater access is available to qualified graduate students.
Specific to Metal Studio:
This is a general all purpose metal fabrication teaching facility. The equipment is well maintained and upgraded on a yearly bases.
Welders: Gas- oxygen & acetylene. Electric- MIG, TIG, Shielded Arc.
Welding Cutters: Gas- oxygen & acetylene: Electric- Plasma Cutter.
Welding Safety Gear: Auto-darkening welding helmets, protective clothing.
Hand held or portable tools: A well maintained general assortment and number of grinders, sanders, cutting tools, heat guns, cordless drills, chop saw and wrench sets.
Clamps & vices: Large all-purpose assortment .
Work surfaces: Steel welding and fabrication tables.
Clean Air Filtration systems: Industrial grade portable charcoal filtration system.
Large floor mounted equipment: Benders- 2m power roller, pipe bender, angle bender. Sanders- belt and disc sanders. industrial Chop saw, drill press
InteractionLab is a multidisciplinary research group within Sabanci University - Visual Arts and Visual Communication Design Program; currently running research projects on image tracking, physical interfaces, wearable and mobile interaction systems, interior visual design, sonification/visualization in performing arts. Our research studio has wide range of research equipment for developing prototypes including microcontrollers, soldering tools, dremels and other electronic components.
Selcuk Artut - InteractionLab
email: info@interactionlab.biz
VACD program's photography studio is a medium size studio that provides the necessary base equipment for live model and/or product shooting, fictional photography. The studio can be used by both photography and video students. It has an assigned keeper and the key needed for access can be obtained from this person. Registered photo/video course students can contact the keeper directly and have access without prior permission by course instructor. Students who do not take photo/video courses yet want to have access first need to contact Murat Germen by e-mail for permission. If permission granted they can contact the keeper for the key. Damage caused by personal mistakes like dropping/breaking pieces will be covered by the student, time-dependent expenses due wear-out are covered by the school.
VAVCD Sound Studios are located at the ground level in Faculty of Arts and Sciences Building. There are basically three separate rooms:
- Sound proof studio for recording audio
- Control room
- Post-production room
Control Room
Sound Cards, Processors, Effects
Pro Tools LE
Apogee Ensemble
TL Audio C1 Valve Compressor
Digimax 96K x 2
T.C. Electronic M2000
Apogee Minime
Joemeek Compressor
Microphones
Neuman U87
AKG c414 x 2
SM57 x 2
SM58 x 2
Neuman KM184
Neuman M147
Neuman KU100 Binaural
Sennheiser MD421
Rode NT2000
Rode NT4
Rode NTG2
Rode VideoMic
Sennheiser EW100 x 2
Speakers
Dynaudio BM6A
Yamaha MSP5
Post Production Room
Sound Cards
Pro Tools LE Mixer
Speakers
MAudio 5.1
Genelec 8030A
Studio for indoor video shooting, animation, compositing, special and visual effects need. The video production studio contain professional chromakey green screen as well as adjustable blue, black and white wallpaper for shooting need. Professional and portable video light sets for multiple usage in video shooting.
The Metal and Wood Studios provide support for Visual Arts and Visual Communication Design students in the development of their studio practice. The facilities: 200 square meters located on the ground floor of the Faculty of Arts & Social Sciences building, serves as support for 3rd year, 4th year and graduate level students. A fulltime technical advisor and safety officer assisted by graduate teaching assistants, provide support for students and faculty Monday through Friday. Limited evening hours are available, supervised by a Teaching Assistant. Greater access is available to qualified graduate students.
Specific to Wood Studio:
This is a general all-purpose wood facility also used at this time as a studio for mold making and polyester work.
Large floor mounted equipment• Industrial table saw, industrial plainer, industrial band saw, band saw, horizontal band saw. Sanders- belt and disc sanders. Industrial chop saw and drill press.
Hand held or portable tools• A well maintained general assortment of sanders, cutting tools, heat guns, cordless drills, chop saw, glue guns, and wrench and driver sets.
Clean Air Filtration systems• Industrial grade portable charcoal filtration system as well as a built in dust collection system for industrial equipment.
Safety Gear• protective eye wear and face shields, ear protection, dust masks and disposable hand protective clothing.
Clamps & vices• Large all-purpose assortment .
Work surfaces• work tables space is limited, students must be able to move in-progress to their studios.
Other• Stocked materials store room for student use.